Queen size bedroom set – If you bought a queen size bed and bed, but have not bought a new headboard, you can adapt your standard headboard to fit under your new queen frame. Unfortunately, you should use an adapter plate to attach the standard size header as the width of the mounting brackets for the queen size frame are wider than the holes in the headboard. Measure the width between the outer edges of the headrest mounting brackets located on the queen size frame of the bed with a tape measure. Cut a 1-inch thick per 3-inch wide pine board to the length obtained in step one. Use a saw to get a clean, square cut.
Queen size bedroom set, place the board through the mounting brackets on the queen size bed and transfer the holes from the mounting brackets to the wooden board with a stylus. Drill to each hole mounting situation with a drill bit that matches the diameter of the holes in the mounting brackets on the queen bed frame. Attach the gasket to the mounting brackets on the bed frame with bolts, nuts and a ratchet. Center of the standard headboard against the Board you just installed to have equal distances between each edge of the bed and each edge of the headboard.
Queen size bedroom set, transport the mounting holes from the headboard to the wooden board bolted to the frame. Drill the hole with a drill bit that matches the diameter of the holes in the headboard. Attach the headboard to the board by bolting the bed frame with bolts, nuts and a ratchet. Before drilling and mounting the dashboard to the bed frame, stain or paint the dashboard to match the color of the headboard. This will add a uniform appearance to the bed. However, depending on your needs, this is optional.