King size bed frame – It’s easy to spend several hundred or more than a thousand dollars on a king bed frame. But you can build a stable, robust platform frame for your king mattress for less than $ 100. This project takes one to two hours dedicated construction time plus dry time if you choose to paint. These plans are for a standard king mattress, but you can use them for a California king by adjusting the work dimensions. Mount two 74-inch beams and two 76-inch beams in a rectangle rest on their 2-cm wide sides. Arrange them so that 76-inch beams are inside 74-inch beams. Attach beams with two wooden screws per joint, run through the 74-inch width and at the end of the 76-inch beam
Place the third 76-inch beam inside the king size bed frame you have built in the middle and parallel to the other 76-inch beams. Connect it to 74-inch beams in the same way as you did the others. Place the plywood board on top of the frame so that it overlaps each edge of an inch. Screw it in place with a wooden screw in each corner. Reinforce with a wooden screw centered along each 76-inch edge and two wooden screws evenly distributed along each 80-inch side. Lay the frame so that it rests on the plywood board, with the beam facing upwards.
0 Inspiration Gallery from How to Build King Size Bed Frame
King size bed frame, place a plank on the top so that its purpose rests on a plywood board, close to 74-inch beams. Screw with five wooden screws, evenly distributed, drilled through the shelf and into the beam behind. Repeat for the other end with a second plank. Set the other three planks at the end with the ends resting on the plywood board, each flush against one of the 76-inch beams. Screw each plank into place with five wooden screws evenly distributed, driven in as you did with planks. Turn the frame over and place it in place. You may want to get an assistant for this because the frame will be heavy. Place a plank on the top so that its purpose rests on a plywood board, close to 74-inch beams. Screw with five wooden screws, evenly distributed, drilled through the shelf and into the beam behind. Repeat for the other end with a second plank.