DIY Simple Sauder Corner Desk : Modern Sauder Corner Desk

Cut a 3-of -1-inch housing on two sides at the end of each wooden plank that is on the legs. Use the saw to make 1-inch deep cut, three inches from one end of planks, on two sides. Make vertical cut along the plank purpose, 1-inch deep and three inches long, cut the scrap wood. Fit the cover to the end of the legs at the corners of the image, which is still upside down. Glue the house on the frame, make sure the legs are at right angles, squeeze and allow drying. Drill a 1.5 inch hole in the frame from each side of the leg protruding and then screw the legs on the frame. Turn the desk so it is now on the legs. Sand the entire Sauder corner desk and then apply three layers of paint, according to the recommended drying times.

This digital imagery of Modern Sauder Corner Desk has dimension 900 x 900 pixels, you can download and obtain the Modern Sauder Corner Desk digital imagery by right click on the right click to get the high-res version.

Here is necessary clue on Great Sauder Corner Desk. We have the finest source for Great Sauder Corner Desk. Check it out for yourself! You can find Modern Sauder Corner Desk guide and see the latest DIY Simple Sauder Corner Desk in here.

Back to DIY Simple Sauder Corner Desk

Comments are closed.