Building Double Entrance Doors Frame : Double Entrance Doors Kit

Cut the jamb header to the length, 1/4 inch wider than your double entrance doors, using a power saw. Mount three pieces of jamb frame by gluing and nailing the horizontal jamb header into the slots in the vertical side jambs using 16d frame nails. Attach the three parts of your pre-cut brick mold to the outside of the jamb frame. The two vertical side posts should be set with 45 degrees of miters at the top. Fit tops that are intersected at both ends, between them to adjust vertices for placement on the jamb. Spike the shape in place with 2-inch surface nails placed every 12 to 16 inches.

This digital imagery of Double Entrance Doors Kit has dimension 271 x 230 pixels, you can download and enlist the Double Entrance Doors Kit digital imagery by right click on the clicking the right mouse to get the high resolution version.

Here is foremost notification on Double Entrance Doors Addition. We have the best step for Double Entrance Doors Addition. Check it out for yourself! You can get Double Entrance Doors Kit guide and view the latest Building Double Entrance Doors Frame in here.

Back to Building Double Entrance Doors Frame

Comments are closed.